IP65 Garden Lasers User Manual
Remote Control Instructions:
The remote has an effective range of 15 metres (50 feet). This will be reduced if there are obstacles around the unit.
Only the speed settings of the laser unit will be saved if you disconnect the unit from the mains or switch off via the
power button on the remote.
All settings will be saved automatically if you are using the timer settings to switch off the unit. It will start up on the
same program as when the timer which the unit off.
Look after your remote, it’s the only way you have of adjusting your laser unit!
1.
Power button – Start or Stop the laser on a temporary basis. If the unit is to be out of use for a long time,
unplug the AC adaptor from the mains.
2.
Continuous Speed – 6 different rotational speeds available (including static).
3.
Step Speed – 6 different speed/step settings.
4.
Colour – Select a single colour or a combination of colours.
5.
Flash – 3 settings.
6.
Timer – The timer will automatically switch off after the duration selected. The unit will automatically switch on
at the same time the following day. E.G. If you get you set the timer at 5pm for 6 hours, the laser will switch off
at 11pm and switch on again at 5pm the following day.
7.
Cancel – You can cancel the timer setting so the laser unit can be switched on/off manually.
Activating the remote – A CR2025 battery is already in your remote control unit. Remove the plastic insulation tab.
This will enable the remote to work. If the remote isn’t going to be used for a long period of time, it is an idea to re-
insert the plastic tab to save battery life.
