AVProEdge conferX AC-CX84-AUHD, Руководство пользователя

Страница: 18 / 37

18
Command Examples:
Using A Terminal Program (RS232):
In the following example we are using a program called MYUART Assist. We make this program free-
ly available form www.avproedge.com.
You will notice in the example that it is on 2 lines. This is because you have to separate the com-
mands with a return.
The command below was sent through the HDBaseT Rx on Output 5 to successfully “Power On” a LG
TV.
The firmware will send a command acknowledgment at 57600 to the extender. This shows up as “RS
DEV MUX 0.0.0.0.0.0.0.0.0.0”, if the end device is receiving at 57600. The Matrix itself also sends
an acknowledgment commands SET RS PTH OUT5 LEN10 to confirm the rout was set and command
sent.
Using TELNET (IP):
Using A Terminal Program (RS232):
In the following example we are using a program called MYUART Assist. We make this program free-
ly available form www.avproedge.com.
You will notice in the example that it is on 2 lines. This is because you have to separate the com-
mands with a return.
The command below was sent through the HDBaseT Rx on Output 5 to successfully “Power On” a LG
TV.
The firmware will send a command acknowledgment at 57600 to the extender. This shows up as “RS
DEV MUX 0.0.0.0.0.0.0.0.0.0”, if the end device is receiving at 57600. The Matrix itself also sends
an acknowledgment commands SET RS PTH OUT5 LEN10 to confirm the rout was set and command
sent.