AVProEdge conferX AC-CX84-AUHD, Руководство пользователя

Страница: 11 / 37

Audio Control: Audio Binding
The AC-CX84-AUHD has 3 settings for the Extracted Audio.
• BIND TO OUTPUT (extracted audio switches with the video, this is the default mode)
• BIND TO INPUT (extracted audio is fixed to the corresponding input by the same number)
• INDEPENDENT/MATRIX (extracted audio can be routed however you like and there are
commands to allow it to function as a s`eparate matrix)
To Change:
1. Press and hold (3 sec) the BYPASS button by the Audio Delay settings (top far right button).
2. NOTE: The UP/DOWN/BYPASS buttons will now be lit up, current setting displayed on screen
3. Use the UP and DOWN buttons to change to the desired option
4. Press the BYPASS button again to set.
5. NOTE: Will automatically exit out of matrix mode after 10 seconds of inactivity. If you do
not press the BYPASS button to set, after exiting the menu any selection/changes made will
be lost.
6. Press the BYPASS button once more to exit.
Audio Control: Audio Switching
The Extracted Audio ports can be independently controlled while in MATRIX Mode.
To Control:
1. Press and hold (3 sec) the BYPASS button by the Audio Delay settings (top far right button).
2.
NOTE: The UP/DOWN/BYPASS buttons will now be lit up, current setting displayed on screen.
3. Make sure the screen says “Matrix” then press the BYPASS button again in order to enter the
AUDIO MATRIX.
4. NOTE: If correct, only the BYPASS button will be lit up.
5. Press the desired extracted audio OUTPUT you want to set.
6.
Press the INPUT for the desired audio source you want to route to the previous OUTPUT se -
lection.
7. Once set, press BYPASS button again to exit the audio matrix mode.
8.
NOTE: Will automatically exit out of matrix mode after 10 seconds of inactivity. Any selection/
changes made will stay as they are set once the INPUT/OUTPUT buttons are pressed.
11