AC-EX
7
0-444-KIT
■
Audio Extraction
on AC-EX
7
0
-
444
A feature that is always active on the AC-EX
7
0-444 (T
x
and R
x
) is
Audio Extraction
. This feature extracts PCM Audio (2ch) from the
source device
in order
to be r
u
n to a separate amplifier or AVR. BOTH
of
the audio ports are always active (
on Tx & Rx
).
NOTE - These
ports ONLY work
if the source is 2ch. If downmixing is needed, check
out AC-ADM-AUHD or AC-ADM-COTO.
To use the ports:
1.
Simply plug a
3
pin
terminal block into the port on the Tx or Rx
(both
are
always active
)
and make your own cable
assembly
.
2.
There is an option to
buy pre
-
made
unb
alanced
3
-pin to RCA Female
cables from
www.avpros
tore.com
NOTE: The source device needs to
output
PCM audio in order
for the
feature to work
. T
his can be done by using the on-board
EDID
management or setting the source as such.
■
Audio Extraction
Routing Diagram
pg.
1
8
AVProEdge
~
2222 E 52nd Street N Sioux Falls, SD 57104
~ 1.877.886.5112 ~ +1.605.274.6055 ~
support@
avproedge
.com
