Unpacking the Recorder
Execute the following steps to unpack the REC200 and associated components:
1.
Open the box.
2.
Verify that the contents of the box exactly matches the items as described in
on page 12.
If this is NOT the case, contact Avonic and stop here.
The REC200 should be in its protective foam as follows:
Figure 4: REC200 in Foam
3.
Verify that the REC200 is in its protective foam. If this is NOT the case, contact Avonic and stop here.
4.
Take the REC200 out of the protective foam and the box.
5.
Install the REC200 following the steps as described in the chapter
on page
14
Return Procedure
If, for any reason, you have to return the REC200 to Avonic, Execute the following steps:
1.
Place the REC200 back in its protective foam.
2.
Place the REC200 with
all
of its components in the box.
3.
Verify that the contents of the box
exactly
matches the items as described in
4.
for the Return Procedure.
13
