AVOCOR AVF-7510, Руководство по установке и эксплуатации

Страница: 8 / 87

8
Compliance Information
AVOCOR hereby declares that the Product's Model Number:
AVF -7510
Conform with the provisions of:

FCC:
FCC CFR Title 47 Part 15 Subpart B Class A, CISPR 22
ANSI C63.4
ICES-003 Issue 5

CE:
1999/5/EC
EN 55022
EN 55024
EN 61000-3-2
EN 61000-3-3

cTUVus:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1-07

CB:
IEC 60950-1
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
RF Exposure Warning:
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
DECLARATION OF CONFORMITY:
FCC PART 15: