43
Saturation
Adjust the brilliance and brightness.
Press
or
to select the desired level, and then press ENTER.
Range:
0~100;
Default:
50
Note: This function is not available when displaying PC or graphics sources
Backlight
Increase or decrease the intensity of the LCD backlight.
Press
or
to select the desired level, and then press ENTER.
Range:
0~100;
Default:
80
Gamma
Select gamma curve
Options:
Off, 2.2;
Default:
2.2
Colour Temp
Select a colour temperature, or select User to make RGB adjustments.
Options:
User, 5000K, 6500K, 7500K and 9300K;
Default:
9300K
HDMI RGB Range
Select an RGB range for the HDMI input.
Options:
Auto, Full, Limited;
Default:
Auto
Colour Temperature Settings
Red Gain
Set Colour Temperature to “User Mode” in order to adjust this setting.
Range:
0~100;
Default:
100
Green Gain
Set Colour Temperature to “User Mode” in order to adjust this setting.
Range:
0~100;
Default:
100
Blue Gain
Set Colour Temperature to “User Mode” in order to adjust this setting.
Range:
0~100;
Default:
100
Red Offset
Set Colour Temperature to “User Mode” in order to adjust this setting.
Range:
0~100;
Default:
50
Green Offset
Set Colour Temperature to “User Mode” in order to adjust this setting.
Range:
0~100;
Default:
50
Содержание AVF-7510
