Avocent Single port KVM over IP switch Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 75

Avocent Single port KVM over IP switch Скачать руководство пользователя страница 51

Single port KVM over IP switch

51

6.4.4 Video

Figure 6-18. Video Settings

Local Video Port Settings

Enable local video port

This option decides if the local video output of the IP-KVM switch is active and passing
through the incoming signal from the host system.

Miscellaneous Video Settings

• Noise filter

This option defines how the IP-KVM switch reacts to small changes in the video input
signal. A large filter setting needs less network traffic and leads to a faster video display,
but small changes in some display regions may not be recognized immediately. A small
filter displays all changes instantly but may lead to a constant amount of network traffic
even if the display content is not really changing (depending on the quality of the video
input signal). All in all the default setting should be suitable for most situations.

• Force Composite Sync (Required for Sun Computers)

To support signal transmission from a Sun machine, enable this option. If not enabled
the picture of the remote console will not be visible.

To set the options, click on the button “ Apply ”

.

6.5 Device Settings

6.5.1 Network

The Network Settings panel as shown in Figure 6-19 allows changing network related
parameters. Each parameter will be explained below. Once applied the new network settings
will immediately come into effect.

«
...
49
50
51
52
53
...
»

Содержание Single port KVM over IP switch












































































Отзывы:

Нет отзывов