Avocent Single port KVM over IP switch Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 75

Avocent Single port KVM over IP switch Скачать руководство пользователя страница 27

Single port KVM over IP switch

27

A short description of the options follows.

• Monitor Only

Toggles the Monitor

only

filter on or off. If the filter is switched on no remote console

interaction is possible, and monitoring is possible.

• Exclusive Access

If a user has the appropriate permission, he can force the Remote Consoles of all other
users to close. No one can open the Remote Console at the same time again until this
user disables the exclusive access, or logs off.

A change in the access mode is also visible in the status line (see Figure 5-7).

Figure 5-7. Remote Console Exclusive Mode

• Scaling

Allow you to scale down the Remote Console. You can still use both mouse and
keyboard, however the scaling algorithm will not preserve all display details.

Figure 5-8. Remote Console Options Menu:Scaling

• Mouse Handling

The submenu for mouse handling offers two options for synchronizing the local and the
remote mouse pointer.

Fast Sync --

The fast synchronization is used to correct a temporary, but fixed skew.

Intelligent Sync --

Use this option if the fast sync does not work or the mouse settings have been
changed on the host system.

«
...
25
26
27
28
29
...
»

Содержание Single port KVM over IP switch












































































Отзывы:

Нет отзывов