manualshive.com logo in svg

Avocent Cyclades ACS 5000 SERIES, Справочник по командам

Поделиться
Скачать
Avocent Cyclades ACS 5000 SERIES Скачать руководство пользователя страница 98

90

        Cyclades ACS 5000 Advanced Console Server Command Reference Guide

Type menush_cfg and use the available options to define a menu title and menu commands. 

2.

Choose Add Menu Option and complete the requested fields. The following question defines 
the action that must be taken.

Enter the command for the new menu option:

3.

Select option 5 to save the configuration changes to Flash.

NOTE: 

Action may be telnet host_ip or ssh -l username host_ip where host_ip is the IP address of the 

target server.

To assign ports to the menu shell:

1.

If no authentication is required to gain access to the menu, configure the following parameters 
in /etc/portslave/pslave.conf for the ports that use this menu shell.

s<x>.protocol telnet

conf.telnet /bin/menush

s<x>.authtype none

Where <x> is the port number being configured.

2.

If authentication is required to gain access to the menu, the user’s default shell must be 
modified to run the /bin/menush. In /etc/passwd the shell should be changed as per the 
following example.

user:FrE6QU:505:505:Embedix User,,,:/home/user:/bin/menush

3.

In pslave.conf, the port where the serial terminal is attached must be configured for login with 
local authentication.

s<x>.protocol login

s<x>.authtype local

-------------------------------------------------

MenuShell Configuration Utility

-------------------------------------------------

Please choose from one of the following options:

1. Define Menu Title

2. Add Menu Option

3. Delete Menu Option

4. List Current Menu Settings

5. Save Configuration to Flash

6. Quit

Option ==>

Содержание Cyclades ACS 5000 SERIES

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды