manualshive.com logo in svg

Avocent Cyclades ACS 5000 SERIES, Справочник по командам

Поделиться
Скачать
Avocent Cyclades ACS 5000 SERIES Скачать руководство пользователя страница 30

22

        Cyclades ACS 5000 Advanced Console Server Command Reference Guide

Configuring IP tables

IPv4 Syntax

# 

iptables -command chain rule-specification [-t table] [options]

# 

iptables -E old-chain-name new-chain-name

where,

•

table

 

- May be filter or nat. If the option 

-t

 is not specified, the filter table is assumed.

•

chain

•

For filter table: INPUT, OUTPUT, FORWARD or a user-created chain.

•

for nat table: PREROUTING, OUTPUT, POSTROUTING or a user-created chain.

IPv6 Syntax

# 

ip6tables -command chain rule-specification [-t table] [options]

# 

ip6tables -E old-chain-name new-chain-name

where,

•

table

 

- May only be a filter table. The option 

-t

 does not need to be specified.

•

chain - INPUT, OUTPUT, FORWARD or a user-created chain.

NOTE: 

Fragmented packets cannot be filtered in IPv6 configurations.

Command

Only one command may be specified on the command line unless otherwise specified in Table 2.9.

Table 2.9: iptables Commands Options 

Command

Description

-A  - - append

Append one or more rules to the end of the selected chain. When the source and/or 
destination names resolve to more than one address, a rule is added for each 
possible address combination. 

-D  - - delete

Delete one or more rules from the selected chain. There are two versions of this 
command. The rule may be specified as a number in the chain (starting at 1 for the 
first rule) or as a rule to match.

-R  - - replace

Replace a rule in the selected chain. If the source and/or destination names resolve 
to multiple addresses, the command fails. Rules are numbered starting at 1.

-I  - - insert

Insert one or more rules in the selected chain as the given rule number. Thus if the 
rule number is 1, the rule or rules are inserted at the head of the chain. This is also 
the default if no rule number is specified.

Содержание Cyclades ACS 5000 SERIES

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды