manualshive.com logo in svg

Avocent Cyclades ACS 5000 SERIES, Справочник по командам

Поделиться
Скачать
Avocent Cyclades ACS 5000 SERIES Скачать руководство пользователя страница 103

 Chapter 5: Administration        

95

   Restore from SSH server :         restoreconf ssh  <FILE> 

<SSH_SERVER> <USER>

Saving or restoring configuration files using CLI

Use the following commands to save or restore configuration files.

•

Save to Flash

cli> 

config savetoflash

•

Save to FTP server

cli> 

administration backupconfig saveto ftpserverip <n.n.n.n> pathname 

<string> username <string> password <string>

•

Load from FTP server

cli> 

administration backupconfig loadfrom ftpserverip <n.n.n.n> 

pathname <string> username <string> password <string>

Crond

Crond is a service provided by the console server that allows automatic, periodically-run custom-
made scripts. It replaces the need to run commands manually.

The crond daemon configuration is divided in three parts.

•

/etc/crontab_files - The name of this file cannot be changed and it must point only to one file.

•

Source file - Holds information about frequency of cron jobs and the files that should be 
executed. It may have any name, since it is pointed out by the /etc/crontab_files.

•

Script files - These are the script files that are scheduled and are pointed by the source file 
explained previously.

The following parameters are created in the /etc/crontab_files file.

Table 5.15: Restoreconf Utility and Storage Device Parameters 

Media

Description

local <File>

Read the configuration from the path and local file.

local <File>

Read the configuration from the path and filename.

ftp <remote path and filename> <IP address of 
the FTP server> <username> <password>

Read the configuration from a remote FTP server.

tftp <remote path and filename> <IP address of 
the TFTP server>

Read the configuration from a remote TFTP server.

ssh <remote path and filename> <IP address of 
the SSH server> <username>

Read the configuration from a remote SSH server.

Содержание Cyclades ACS 5000 SERIES

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды