manualshive.com logo in svg

Avocent Cyclades ACS 5000 SERIES, Справочник по командам

Поделиться
Скачать
Avocent Cyclades ACS 5000 SERIES Скачать руководство пользователя страница 53

 Chapter 3: Security        

45

3.

On the console server, use the CLI utility to edit the parameters described in the following 
table.

cli> 

config security authentication [parameter] <value>

service = 

<authorization 

method>

Specifies the authorization method used and whether the user is allowed or 
denied access when the raccess parameter is set on the console server.
Only users who have this parameter set to raccess have authorization to 
access the specified ports.

port<#> = 

<ACS5000>/

<Port>

Specify which serial ports on the console server the user has authorization to 
access. 
port# is a sequential label used by the console server. 
<ACS5000> is the name or IP address of the console server box.
<Port> is the serial port the user may access on the specified
console server.

Table 3.8:  Configuration Parameters 

Parameter

Value

Description

tacplusauthsvr1

<n.n.n.n>

This address indicates the location of the  
authentication server. A second authentication 
server may be configured with the parameter tacplusauthsvr2.

tacplusacctsvr1

<n.n.n.n>

This address indicates the location of the  
accounting server, which may be used to track how long users 
are connected after being authorized by the authentication 
server. Its use is optional. If this parameter is not used, 
accounting is not performed. If the same server is used for 
authentication and accounting, both parameters must be filled 
with the same address. A second  accounting 
server may be configured with the parameter accthost2.

tacplussecret

<tacplussecret>

This is the shared secret (password) necessary for communication 
between the console server and the  servers.

tacplusraccess

yes|no

This is raccess authorization on the server. Should 
be enabled for authorization on serial ports.

tacplustimeout

<number>

This is the time-out (in seconds) for a  
authentication query to be answered.

tacplusretries

<number>

Defines the number of times each server is tried 
before another is contacted. The first server 

authhost1

 is tried 

for the specified number of times, before the second 

authhost2

, if configured, is contacted and tried for the 

specified number of times. If the second server fails to 
respond, authentication fails.

Table 3.7: Parameters for Specifying User Authorization on a Server (Continued)

Parameter

Description

Содержание Cyclades ACS 5000 SERIES

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды