Avnet Zynq Mini-ITX, Руководство пользователя

Страница: 2 / 11

1
1 Introduction
This document describes a simple Zynq design that can be used to allow the ARM
DSTREAM debug device to be connected to the Avnet Zynq Mini-ITX development
board.
2 Reference Design Requirements
This reference design will require the following software and hardware setups.
2.1 Software
The software requirements for this reference design are:

Xilinx Vivado 2015.2
2.2 Hardware
The hardware setup for this reference design is:

Computer with 4 GB RAM and 1 GB virtual memory (recommended)

Avnet Zynq Mini-ITX Development Board

Power supply Module

ATX power supply

USB A-mini-B cable

ARM DSTREAM Debug Adapter

microSD card