MaaXBoard_Mini-Linux-Debian-UM-V1.1
http://www.avnet.me/maaxboardmini.com
9
Chapter 2 Quick Start
The default version of MaaXBoard Mini support boot up from SD Card only. To burn the image to SD Card,
refer to
. For the hardware connection and accessories details, please check the QSG.
2.1 Boot from SDCard
Install the Serial Communication software (e.g. PUTTY), select the corresponding port number,
baudrate as 115200, data bits as 8, stop bits as 1, parity as none.
Connect the debug interface to PC with USB to TTL converter. Pin 6, 8 and 10 of J10 to the GND,
RXD and TXD pin of the USB to TTL converter.
Insert the SD card (with pre-burned image) into the card slot J9. (If you are using an eMMC version
board, ignore this step.)
Powered the board with a 5V, 2A, Type-C interface power (to J11).
When the system boot up, the serial terminal will print the following information: