AvMap GeoPilot II, Быстрое руководство

Страница: 8 / 12

Units Setup
This sub-menu contains the various options that define how the Geopilot2 displays
units of measurement
Date & Time Setup
These functions control how the Geopilot2 displays time and date settings.
Clear User Data
Deletes all Flight Plans, Track history and User Waypoints.
Clear all Radials
You can delete all stored Projected Radial lines displayed on the Moving Map with this
one function.
Factory Defaults
This will restore the GeoPilot2 to all factory default settings.
1.3 TURNING THE GeoPilot2 ON/OFF
Before powering On the GeoPilot2, check for the correct voltage (10-35 Volt DC).
1.3.1 TURNING ON
Press and hold ‘NEAR’ for 1 second. The GeoPilot2 emits one rapid beep sound
and a Title page containing information about the Product name, Software version,
library version and cartridges installed is displayed. This data can also be viewed in
the “About” page in the “Main Menu”.
After a few seconds the Warning page is displayed, reminding you that the GeoPilot2
is an aid to navigation and should be used with appropriate prudence. The electronic
charts are not intended to substitute for the official charts. Press ‘ENTER’ to open the
Moving Map screen.
1.3.2 TURNING OFF
‘NEAR’ 3 sec.: a countdown timer appears on the screen, if you release the key
before the countdown timer reaches zero, the GeoPilot2 will remain On.
1.4 CHANGING BRIGHTNESS
Press and hold 1 sec ‘NEAR’ to adjust the brightness of the display and keyboard (do
not press and hold the key for 3 sec. or the “power-off ” message will be displayed!).