AvMap G7 Farmnavigator Скачать руководство пользователя | Manualshive

Страница: 71 / 80

background image

71

AvMap G7 Farmnavigator – User Manual

-‘USB Cable/ Video in’ (g7 Ezy, p/n: K2CYFS0600) or cable USB / Video in / Ethernet’ (G7

Plus, P/N: K2CYFS1000).

Perform the following procedure:

1.

Copy the update file from a PC to

USB stick;

2.  Connect USB cable to the G7 Farmnavigator bracket;
3.  Insert USB stick into the USB connector of the supplied cable;
4.  Turn G7 Farmnavigator on, the device starts in update mode;
5.  Tap “UPDATE NOW” to install the update;
6.  Tap “CONTINUE” and wait for the program to start;
7.  The update is now completed and the USB stick can be dismissed.

6.2 Video camera

G7 Farmnavigator allows you to connect an external, analogic video camera. There are no settings
to be performed on the software.

6.2.1 Type of supported cameras

G7 Farmnavigator supports analogic cameras with PAL o NTFS format.
The video camera must be provided with a male RCA connector. Power to the video camera must
be supplied externally to G7 Farmnavigator. IP and USB camera are not supported. Power must be
supplied externally.

6.2.2 Connect a video camera

It is possible to connect a video camera to G7 Farmnavigator via the ‘USB cable/Video in’ (G7 Ezy,
P/N: K2CYFS0600) or ‘USB cable / Video in /Ethernet’ (G7 Plus, P/N: K2CYFS1000). The cable is
provided with an analog RCA female video input.

Figure 6.2.a How to connect a video camera to G7 Farmnavigator

6.2.3 Display mode for Video camera

When the camera is properly connected to G7 Farmnavigator, the video camera icon will be
automatically activated on the main page of your job.

-Tap the camera icon displayed on the main page of your job to switch to video mode.

«
...
69
70
71
72
73
...
»

Содержание G7 Farmnavigator

















































































Отзывы:

Нет отзывов

Похожие инструкции для G7 Farmnavigator

Бренд: dB Technologies Страницы: 98

Mobile Video 128-8342

Бренд: Audiovox Страницы: 26

Бренд: Audiovox Страницы: 179

Бренд: Grundig Страницы: 34

Бренд: Viking Страницы: 2

Бренд: Hyundai Mobis Страницы: 234

GMX550 LOCKPICK

Бренд: Coastal Electronic Страницы: 10

Бренд: Xomax Страницы: 28

Бренд: Pyle Страницы: 21

Бренд: YAMADA Страницы: 15

Бренд: Toyota Страницы: 37

Бренд: Toyota Страницы: 41

Бренд: Toyota Страницы: 35

N7 Pro platform

Бренд: Dynavin Страницы: 79

Бренд: Metra Electronics Страницы: 4

Бренд: Metra Electronics Страницы: 4

Бренд: iCartech Страницы: 62

Бренд: ZENEC Страницы: 77

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды