FRITZ!Box as a Repeater
FRITZ!Box Fon WLAN 7113
87
9.
Select the “Repeater” option as the operating mode.
10.
Select from the “Known WLAN Devices” list the WLAN
device that should be used as the base station.
11.
If the FRITZ!Box is to be operated as a repeater, you
must change its IP settings.
–
IP address
–
Enter here the IP address for this FRITZ!Box, tak-
ing the following into consideration:
–
The FRITZ!Box must have a different IP address
than the base station.
–
The IP address must be from the IP address range
of the base station.
–
The IP address may not come from the address
pool of the DHCP server of the base station.
–
Subnet mask
–
Enter the value “255.255.255.0” in this field.
–
Default gateway
–
Enter the IP address of the base station here.
–
Primary DNS server
–
Enter the IP address of the base station here.
–
Secondary DNS server
–
Enter the IP address of a second DNS server here.
12.
In the “Security” area define how the repeater con-
nection should be encrypted.
13.
Enter a password.
14.
Click “Apply”.
The “Repeater Settings” of the FRITZ!Box are dis-
played.
Please note that the WPA2 encryption method is only
available for AVM AVM devices.
