AVM CD 30.3, Руководство по эксплуатации, Страница: 7 / 19

7
14
Right analog output (balanced XLR)
15 Analog outputs (unbalanced,
Cinch/RCA)
16 Left analog output (balanced XLR)
17 Optical digital output
18 Coaxial digital output
19 Coaxial digital output
20 Coxial digital inputs
21 Digital input AES/EBU
22 Power supply connection
23 Power switch
1.3 Pin assignments
1.3.1 Assignment XLR connectors
Eingang Ausgang
1) Ground (GND)
2) POS (+)
3) NEG (-)
1.4 Installation and cooling
The CD 30.3 generates almost no heat during normal operation. Therefore, it can be installed
in a rack without any problems. If you place the unit in a cabinet, please ensure sufficient air
circulation. If you place other components above or below your CD 30.3, please ensure a
minimum distance of 1 cm. We also recommend a location that is protected from direct sunlight
so that you can easily read the indications on the display of the device (7). Avoid placing the
device in the direct vicinity of a heating or in areas with extremely high humidity. When setting
up the unit, also make sure that there is a free area of at least 15 cm in front of the CD slot (8),
so that CDs can be inserted and ejected without hindrance.