
14
By pressing the
PROG
key (4) again, a
random playback sequence (RANDOM)
is
automatically programmed.
Press the
PLAY/PAUSE
key (10) to enter the
title programming
:
On the left side of the display (7) the title number (
TRCK
) of the new title to be programmed is
shown. It can be selected with the two
SKIP
keys (11, 12). Below this the length of this title is
displayed (
TIME= xx:xx
).
Use the
PLAY/PAUSE
key (10) to insert the title into the program. The display (7) shows the
total number of already programmed titles in the upper right line (
PGM-QTY xx
). Below this the
display shows the total programmed playing time (
TOTAL xx:xx
).
With the
PROG
key (4) the program is stored. A possibly previously set repeat function is
deleted. By pressing the
STOP
key (9) you leave the programming menu without storing the
program.
2.13.1
Programming (Example)
The inserted CD contains all tracks, but only intend to play tracks 7, 3 and 8 in that order.
•
Press the
PROG
key (4) then the
PLAY/PAUSE
key (10) to enter the programming
menu. Since no titles have been programmed yet, the top line of the display will show
PGM-QTY
00 (right),
TRCK 01/15
(left).
•
Use the
SKIP
keys (11, 12) to select the title number 7 (display:
TRCK 07/15
).
•
Now insert the title into the program using the
PLAY/PAUSE
key (10).
•
Now use the
SKIP
keys (11, 12) to set the title number 3 (
TRCK 03/15
)
•
Use the
PLAY/PAUSE
key (10) to insert the title into the program.
•
Now set the title number 8 with the
SKIP
keys (11, 12) (
TRCK 08/15
)
•
Use the
PLAY/PAUSE
key (10) to insert the title into the program.
•
Finally press the
PROG
key (4). The title programming is now active and can be played
back with the
PLAY/PAUSE
key (10).
NOTE
: The maximum number of titles to be programmed is limited to 99. The maximum
program duration is limited to 99 minutes and 59 seconds.
Deleting the programming
To delete a programming, press the
PROG
key (4) and then the
STOP
key. Ejecting a CD or
switching off the machine also erases a programming. However, when switching to another
source, a programmed track sequence is retained.
Содержание CD 30.3
Страница 1: ...Operating Instructions CD 30 3 ...
Страница 2: ......