26
10.0 Troubleshooting
Problem
Possible Cause
Solution
Light will not
activate
•
Battery
connector
•
Batteries are
connected
incorrectly
•
Battery voltage
too low
•
Ensure internal battery connector
in the AV-HL-FL-PV is connected
•
Ensure batteries are properly
connected
•
Ensure battery voltage is above
12V
Avlite Handheld
Controller will not
turn on
•
Battery of
Handheld
Controller is flat
•
Recharge the battery. The unit can
be left attached to the charger for
a constant battery charge
Problem
Possible Cause
Solution
Light will not
activate
•
No power at unit
•
Unit is damaged
•
Ensure input supply is within
required voltage range
•
Check Junction Box connections
are correct and undamaged
•
Verify that the upstream system is
active
Light not dimming •
No Analog Input
connection
•
Incorrect Analog
input voltage
•
Verify Analog input is within the
correct range (refer to section 6.0
Operation and Setup)
•
Check Junction Box connections
are correct and undamaged
Light not
producing alarms
•
No Power at unit
•
Digital input not
connected
•
Check Junction Box connections
are correct and undamaged
AV-HL-FL-DC & AV-HL-FL-UM
AV-HL-FL-PV
9.0 Replacement Parts
If replacement parts are required, please call a local Avlite distributor and reference the
Product or Configuration Code called out in the “Product Configuration and Options” section
of the corresponding product data sheet.
