Latest products and information available at www.avlite.com
12
AV-09-4WL Solar Windsock Light Kit
Installation of the Battery & Battery Box
Tools required
• Spanner
Unpacking instructions
Unpack all hardware and verify container contents in accordance with Figure 7 “Battery and Battery
Box”. Please contact your Avlite office if there is any hardware missing.
Initial inspection
Inspect all hardware for damage. If there is any damage, please contact your Avlite Office. Retain
original packing material for possible future use in shipping the AV-09-4WL.
Installing the Battery Box
Refer to Figure 7 “Battery and Battery Box” during installation of the Battery and Battery Box.
a. Open the battery box cage door and place the battery case (Ref 7.1) into the cage with the hinge
of the case adjacent to the hinge of the cage.
b. Open the battery case and lower the battery into the case ensuring the battery terminals are
upright.
c. Insert one bolt (Ref 7.3) with a washer (Ref 7.4) under the head through each of the battery
terminals.
d. Connect Battery (-) cable from the solar regulator to the Battery (+) terminal
e. Connect Battery (+) cable from the solar regulator to the Battery (-) terminal
f. Connect Solar (-) cable from the solar regulator to the Solar (-)
g. Connect Solar (+) cable from the solar regulator to the Solar (+)
h. Connect Load (-) cable from the solar regulator to the light (-)
i. Connect Load (-) cable from the solar regulator to the light (+)
Note: The regulator connection points are numbered. Please follow the sequence for correct
installation.
