AvLab ACEPRO-CEB-8-1, Руководство пользователя

Страница: 26 / 36

HDMI 4K HDBaseT Wallplate Kit
22
Display On
Enter the RS232 command to turn on the display.
Display Off
Enter the RS232 command to turn off the display.
Input Select
Enter the RS232 command to switch to the input which is connected to the
receiver.
Input Select Delay
Enter the delay time in seconds between the Power On and Input Select
commands. This delay may be between 1 and 100 seconds.
Baud Rate
Select the baud rate necessary to communicate with the display. Available baud
rates are: 2400, 4800, 9600, 14400, 19200, 38400, 56000, 57600, and 115200 baud.
Parity
Select parity for RS232 communication.
Command Ending
Select the command ending for each RS232 command. Available command endings
are: null, carriage return, line feed, carriage return and line feed.
No Activity Timeout
The system will enter standby, and the display will automatic shutdown when no
signal input within the setup time.
Save/Cancel
Save or cancel setting.
Note: Please refer to the display device’s user manual for more command details.