AvLab ACEPRO-CEB-8-1, Руководство пользователя

Страница: 12 / 36

HDMI 4K HDBaseT Wallplate Kit
8

HDCP: The LED illuminates green when there is HDMI video traffic with
HDCP. It will blink green when there is HDMI video traffic without HDCP and
will be off when there is no HDMI video traffic.
③
POWER LED: The LED illuminates red when power is applied.
④
TCP/IP: RJ45 port to connect the control device (e.g. PC) to control the system
by GUI.
⑤
HDBT IN/PoC: RJ45 port to connect the PoC IN/HDBT OUT port of transmitter
by CATx cable.
⑥
TO DISPLAY: Type-A female HDMI output port to connect a display device (e.g.
Projector).
⑦
FROM TOUHSCREEN: Type-A USB port to connect a touch screen device (e.g.
Smart Board) to transmit USB signal back to the Host PC. The port also can be
connected to an interactive projector to achieve on-line handwriting
annotation, but it can’t be synchronized to the Host PC.
⑧
IR OUT: 3.5mm mini jack to connect IR emitter to control the display device.
⑨
RS232: 3-pin terminal block to connect the display device (e.g. Projector) for
RS232 control.
⑩
REMOTE MUTE: 3-pin terminal block to connect the fire alarm system. When
the fire alarm signal input, the audio output will be set to mute.
⑪
LINE OUT: 3-pin terminal block to connect an audio broadcast device to output
HDMI embedded audio and MIC audio in mixed mode. In additional, the port
can be connected to a sound recorder for sound recording.
⑫
LINE/MIC Level Selector Switch:

When the switch turns to “ MIC ”, the microphone input is connected to
dynamic microphone. There are two different connections:
1) Unbalanced connection:
“
╧
” connects to ground, and “-” connects to signal.
2) Balanced connection:
“+” connects to positive, “-” connects to negative and “
╧
” connects to
ground.