AvLab ACEPRO-CEB-8-1, Руководство пользователя

Страница: 29 / 36

HDMI 4K HDBaseT Wallplate Kit
25
5.4 Copy and Load Control Settings
The system IR or RS232 configuration can be copied to a USB thumb drive and
loaded into additional systems or be saved as a backup.

Copy Control Setting
1) Insert a 4GB or smaller FAT32 formatted thumb drive into the CONFIG port
on the control panel.
2) Synchronously press HDMI 2 and OFF buttons for three seconds on control
panel. As soon as release the buttons, they will light up while the copy is in
progress.
3) Remove the thumb drive from the CONFIG port once all buttons go dark.

Load Control Setting
1)
Insert a 4GB or smaller FAT32 formatted thumb drive with saved
configuration settings into the
CONFIG port on the control panel.
2) Synchronously press HDMI 1 and ON buttons for three seconds on control
panel, and then the buttons will go dark while import successfully.
3) Remove the thumb drive from the CONFIG port once all buttons go dark.
4) Enter the Command Tab via GUI, the loaded RS232 commands will be
showed, and then press
Save to confirm them.