AAQ Controller Interface Panel (CIP)
21
Figure 32 - CIP Jog Screen
The Jog Screen uses all the keys for custom Jog Screen control. Left or right key will rotate azimuth motors. Up or
down keys will rotate elevation motors. The Go key will toggle between Slow and Fast speeds. Holding the stop key
and then pressing left or right will rotate polarization motors. Holding the stop key and then pressing the down
button will send the “crosspol” command to the controller. To exit the Jog Screen, press the stop key five (5) times.
XXXXX XXXXXXXX
3.4.21.
Login Screen
Figure 33 - CIP Login Screen
From the Enable Jog Screen press the stop button eight (8) times to enter the Login Screen. The user must enter a
valid user ID and Password to gain access to the Extended Technical User Screens. The up and down arrows are used
to select the desired character that is part of the ID or password. The left and right arrows navigate to the desired
character to edit. Once the User ID is complete press the go button to move to the password field. When the
Password is complete press the go button to send the ID and password to the controller for verification. If a valid
ID/password is entered, the first extended screen (Jog Speeds Prompt Screen) will be displayed.
3.4.22.
Jog Speeds Prompt Screen
Figure 34 - CIP Jog Speeds Prompt Screen
From the Jog Speeds Prompt Screen, press the go button to navigate to the Jog Speeds Screen, or press the down
button to navigate to the Compass Heading Screen. Note that from any of the Extended Technical User
Prompt
Screens, return to the Limited User Screens can be obtained by pressing the stop key eight (8) times.
√
