AAQ Controller Interface Panel (CIP)
17
3.4.10.
Peak Command Screen
Figure 21 - CIP Peak Command Screen
The Peak Command Screen facilitates the “Peak” command. While on this screen, the press/release of the Go button
will send the “Peak” command to the controller. (The long press of the Go button will send the “acquire” command
as usual.) The down arrow will navigate to the Alarms Prompt Screen.
↓
3.4.11.
Alarms Prompt Screen
Figure 22 - CIP Alarms Prompt Screen
The Alarms Prompt Screen provides access to current alarms and to limit status. From this screen the right arrow will
navigate to the Current Alarms Screen and the Go button will navigate to the Limit Status Screen. The down arrow
will navigate to the Active Profile Screen.
→
3.4.12.
Current Alarms Screen
Figure 23 - CIP Current Alarms Screen
The Current Alarms Screen shows any/all current alarms that the user can scroll through by using the up and down
arrows. If there are no active alarms, a message of “None” will be displayed on the LCD display. To return to the
Alarms Prompt Screen, press either the stop or go button. From the Alarms Prompt Screen,
↓
will navigate the user
to the Active Profile Screen.
√√
