Loom Manual
Page 14
4)
The user pulls the beater forward to beat the weft yarn into the shed.
5)
Using the left button, the user changes
shed, and then returns the beater to its
rear position.
6)
The user repeats the process starting at
step 3.
NOTES:
a)
At first weft insertion, the user must pre-
position the weft for the rapier. To
accomplish this:
1.
The beater is pulled forward to
the stops.
2.
The weft yarn is pulled from the tensioner, through the open scissor and held the
end at the left side of the reed holder, which will be the fell line location. This
positions the weft yarn to be grabbed by the rapier.
3.
The beater is pushed back, then the rapier is activated.
b)
Selecting and holding the left (SHED)
button on the beater for a count of 15
seconds will switch shed modes. The two
shed modes are:
1.
Double shed (normal operation)
2.
Single step shed
(maintenance/diagnostics); Use
single step when lubricating the
hooks and when diagnosing hook
selection issues.
c)
The loom controller will automatically shut off all solenoids after fifteen seconds of
activation, which may occur in single step mode at center shed. In addition, the solenoids
are automatically inactivated at open shed.
Содержание TECHNICAL EDUCATION LOOM
