manualshive.com logo in svg

Avizia CA310, Руководство по установке пользователя

Поделиться
Скачать
Avizia CA310 Скачать руководство пользователя страница 9

!

The “exclamation mark” within an equilat-
eral triangle is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions within 
literature accompanying the equipment�

Manufacturer

Follow instructions for use� 
Suivez les instructions d’utilisation�

Pushing or pulling the system with any part 
of the system other than the handle may 
result in damage to the system�  Always fully 
lower the work surface before transport and 
use the system handle to maneuver�

Use the handle to pull the system safely 
across thresholds, cords, cables, and other 
potential obstacles on the ground� Always 
fully lower the work surface before trans-
porting the system�

CAUTION!  

This device contains a battery.

ATTENTION! Ce dispositif contient une batterie.

1.   DO NOT expose battery to high temperatures.

NE PAS exposer la batterie à des températures élevées.

2.   DO NOT expose this battery to moisture.

NE PAS exposer cette batterie à l'humidité.

3.   DO NOT subject the battery to mechanical shock or 

vibration.

NE PAS soumettre la batterie à des chocs mécaniques ou 

des vibrations.

4.   DO NOT disassemble this battery.

Ne démontez pas la batterie.

5.   Turn OFF while not in use.

Coupez lorsqu'il n'est pas utilisé.

6.   If the battery will not be used for long periods of 

time, store in a shaded and dry area. Fully charge the 

battery every 60 days.

Si la batterie ne sera pas utilisé pendant de longues 

périodes de temps, magasin dans une zone ombragée et 

sec. Charger complètement la batterie tous les 60 jours.

7.   Use only dedicated charger.

Utilisez uniquement le chargeur dédié.

PC

AUX

MON

PRODUCT NAME:  Li-Ion Battery

Nom du produit:  Batterie Li-Ion

BATTERY MANUFACTURER / ADDRESS:

Fabricant de la batterie / Adresse:

ITM Semiconductor Co., Ltd.

82-7 Gwahaksaneop 1-ro, Oksan-myeon,

Cheongwon-gun Ochang, Chungcheongbuk-do, 

Korea 363-911

MADE IN KOREA

 / 

Fabriqué en Corée

This module contains no user-serviceable parts.

Ce module ne contient aucune pièce réparable par 

l'utilisateur.

 

Located on Power Module housed within the worksurface.

 

Located on the rear of the system at the bottom of the system column.

Equipment markings

CA310  |  Installation & User Guide

Equipment markings

© 2017 Avizia Inc.  All rights reserved.  |  avizia.com  |  AVZ-270920-A

9

|  Before getting started

Содержание CA310















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды