28
Appendix C Using the Touch-to-Mouse Utility
(for Windows XP only)
The Touch-to-Mouse utility is designed for use with a touch-screen monitor and a remote computer
running Windows XP. To start the Touch-to-Mouse utility, perform the following steps:
Step 1.
Copy
the file
“Sequoia USB Touch Tool.exe” to the designated computer.
Step 2.
Double-click
the file:
“Sequoia USB Touch Tool.exe”.
Step 3.
Right-click
the Touch-to-Mouse icon (
) appearing on Windows taskbar and select
Settings
.
Step 4. Set the
Double-click Speed
with the slider or enter the time in (
ms
). Note: two successive taps
on the touch-screen mimics double-clicking the left-mouse button.
Figure C-1
Touch-to-Mouse Utility Setup
Step 5. Set the
Right Key Trigger
with the slider or enter the time in (
ms
). To mimic the action of the
right-mouse button, hold your finger on the touch-screen until the specified time has elapsed.
Step 6. Then click
Hide
when finished.
To automatically start Touch-to-Mouse upon the next Windows XP boot-up, right-click the Touch-to-Mouse
icon and select “
Auto-start when Windows starts-up
”. (A checkmark will appear signifying it is enabled.)
