Avital AVISTART 4501, Руководство по установке

Страница: 13 / 28

Type 1
This type of alarm system does not have a factory alarm arm wire. In order to
arm this type of system, simply press the vehicle lock switch while the driver
side door is opened and then close the door. The factory alarm system will
then arm automatically in 10-20 seconds (typically) after the interior lights
have turned off.
For this type of system you do not need to make any additonal wire
connections. (You do need to be connected the vehicle interior lights and
power door locks.)
Type 2
This type of alarm does have a separate factory alarm arm wire. In order to
arm this type of system, close the doors, hood and trunk. Turn the driver side
door key cylinder to the lock position for one second. The factory alarm will
arm automatically in 10-20 seconds (typically).
To rearm the factory alarm system you will need to connect the vehicle arm
wire to the Avital lock wire (which is already connected to the vehicle lock
wire). See the diagrams below.
11
AviStart 4501 Installation Manual - 0999