11
Installing the ADF Output Tray
1.
Raise the Stacker Tray to about 45 degrees and then insert the left pin of the
Stacker Tray to the left hole in the back of the product as illustrated.
2.
Hold the left side of the Stacker Tray with your left hand and press the right
end of the Stacker Tray inward to position the right pin above the right hole in
the back of the product as illustrated. Press down the right pin to slide it into
the right hole.
3.
Pull out the Stacker Extension to the length of the document (
3
), and raise the
Stopper to stop the document (
4
) to prevent documents from falling.
3
4
2
1