Avipas AV-1563, Руководство пользователя

Страница: 21 / 31

19
3). Click "Browse…" to select the “.mrg” update file, then click upgrade button to start the upgrading
process.
4). A "successful upgrade" message will prompt, and camera will reboot after completion of update.
Re-log in to check the firmware version to make sure software upgrade is successful.
Click “Reboot” -> "restore factory default" to restore camera to factory default and reboot. (default IP
192.168.5.163, user name: admin; password admin).
5. Serial Port Communication and Control
AV-1563 could be controlled through RS232/RS485 interface; RS232C serial parameters are as
below:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
5.1
VISCA Protocol Return Command
Ack/Completion Message
Command packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera a 8
Error Messages
Command packet Note
Syntax Error z0 60 02 FF
Returned when the command format is different or
when a command with illegal command parameters
is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due
to current conditions. For example, when commands
controlling the focus manually are received during