Ref#92550216001
Power Controls
The Power Controls page is the panel where the user can directly turn off / on
power to the attached device, set timers and name the outlet.
Name
In the name section the device name can be set. Simply type in a name you
would like for the deice and hit the apply button. Name does not support special
characters (eg. ! *%)
Control
The control section allows the user to directly turn on or turn off the device.
Select the control that you would like to execute and hit apply to apply the
settings. This will turn the device on or off.
Timer
The timer allows the user to set an amount of time before a control is activated.
To do this, simply enter the amount of delay time in seconds you would like the
action to occur. Select the On or Off and hit the apply button. When the timer has
reached the time set it will execute your command.
For example if Port 1 is on and I would like to turn it off in 30 seconds, the
command may look something like the following.
* The maximum number of seconds that can be set on the timer of the device is
9999.
- 17-
