Ref#92550216001
Telnet Commands
The 9255 supports telnet protocol and can be controlled in a telnet enabled
environment.
To Login to the 9258 in telnet
1.) Make sure to go to command prompt and type in Telnet and the IP Address of
your 9258 device.
2.) Then type in the login and password in the following format.
admin:12345678
Telnet Commands
Help:
The help command will provide all the commands available on the 9258.
To get the commands in help type: help in the telnet protocol.
Set power:
The set power command allows the device to turn on and turn off
ports on the device. To set power on the device type
setpower p61=1:
Port On
- 29-
