12
BOOM-1 T
acTile
T
ransducer
P
rOcessOr
u
ser
G
uide
Line-Level Output
The BOOM-1 provides a mono, balanced XLR line-level audio output which makes it easy to connect the
unit’s processed audio signal to an external amplifier. The
L
Ine
o
ut
is useful when you want to use an array
of tactile transducers in a large area such as a stage floor, powered by one or more external amplifiers.
The Line Out simplifies the connection of the unit’s processed signal to an external amplifier.
A separate
V
oLuMe
control is available for the line-level output. Use this to control the amount of the
BOOM-1 processed audio signal sent to an external amplifier’s audio input. Note that the front-panel
S
trengtH
control determines the total level of the processed audio signal available to both audio outputs
(Transducer Out and Line Out) on the BOOM-1 processor.
P
N
ote
:
The front-panel Mute switch does not affect audio at the rear-panel XLR Line Out.
DSP Profile DIP Switches
The processed audio output of the BOOM-1 can be fine-tuned to match the tactile transducer being used
and its mounting type (drum throne, platform, performance stool, or stage floor) using the eight
dSp
p
roFILe
DIP switches on the rear panel.
Match the BOOM-1 to your choice of transducer and mounting method with the DSP Profile switches.
