11
BOOM-1 T
acTile
T
ransducer
P
rOcessOr
u
ser
G
uide
Power Connections
The BOOM-1 has a switching power supply that allows the unit to be used with AC power service anywhere
in the world. The AC power inlet uses a standard, detachable IEC power connector. Always use the IEC
power connector with the plug designed for your local power service; avoid using adapters.
Fuse
The BOOM-1 AC inlet includes an internal fuse, size 250VAC~ T3AL. To check the fuse, power off the BOOM-1
processor and remove the power cord from the AC service. Remove the small cover below the AC inlet to
open the fuse compartment. Reinstall the fuse and its cover before powering the unit up.
The fuse is found below the AC inlet.
P
N
ote
:
Always replace the fuse with one of the same value, 250VAC~ T3AL.
Transducer Out
The locking
t
ranSduCer
o
ut
connector is designed to be connected to the tactile transducer(s) mounted on
a drum throne, keyboard seat, performance stool, platform, etc.
The speaker-level output of the BOOM-1 Tactile Transducer Processor’s amplifier uses a two-conductor
locking style connector. This provides a solid connection between the processor output and the tactile
transducer. Speaker cables fitted with the locking connector are readily available in a variety of lengths.
BOOM-1 can be connected to one or more tactile transducers as long as the total impedance is in the
range of 4-8 Ohms.
