Avigilon ENC-4P-H264, Руководство пользователя

Страница: 10 / 192

6
English
Using the Encoder PTZ Controls
Any camera that is connected to an H.264 encoder can have the PTZ
option enabled. Once enabled, the full pan, tilt and zoom controls are
displayed in the Live View for that camera.
To enable PTZ for cameras that are connected to an encoder, see Setting
Up PTZ on page 25.
1. Select a camera from the Port drop down list.
NOTE: The PTZ controls are only displayed when the camera is displayed
by itself.
2. To move the camera field of view, click one of the directional
buttons on the far left.
3. To control the camera’s Zoom , Iris or Focus , click the + or -
buttons.
4. For Presets , you can perform any of the following:
• To add a preset, move the camera’s field of view into position
then give the preset a name and click Set .
• To use a preset, select a name or number from the drop
down list and click Go To .
5. For Patterns , you can perform any of the following:
• To record a pattern, select a number from the drop down list
then click Record . Use the directional buttons to move the
camera and create the pattern. When you are done, click
Stop .
• To run a pattern, select a number from the drop down list
and click Run .
6. To activate an auxiliary command, select an Aux# from the drop
down list and click Start . When you are finished, click Stop .