600-00105-000 Rev 01
-3-
FlightMax EX5000
Operation
General
The EX5000 startup is automatic once power is applied. The system performs a brief
hardware self-test, then systematically initializes its functions. After the system has
been initialized (less than a minute after power-on), the title screen appears on the
system page. Database currency information is also presented. It is here that the pilot
is warned of any expired databases.
When the MFD is ready for use, the message “Press any bezel key to continue” is dis-
played.
Operational Controls
1) PhotoCell Light Sensor -
Automatically compensates display brightness for
varying lighting conditions.
2) Brightness Control -
Manually adjusts display brightness level.
3) Data Port -
Provides a front panel access point for loading database updates and
downloading recorded engine data.
4) Buttons -
Used to select modes or change the display as indicated. Active when
label appears on the screen adjacent to the key.
5) Page Control -
Left knob provides quick access to the various MFD pages. The
current page is highlighted in the lower left corner of the screen.
6) Range & Cursor Control -
Right knob controls the Map’s range. When other pages
are selected, the right knob provides item selection control.
7) Message Bar -
The message bar is used to keep the pilot informed about critical and
advisory information from the MFD. When information needs to be conveyed the
message bar appears as the lowest right button.
The message bar can display only one message at a time. If more than one message
is available, the message bar will display the highest priority message on top. The key
associated with the Message must be depressed to clear messages and view those
underneath.