600-00081-000 Rev 07
-3-
FlightMax
Entegra
PFD
5. Pitch Ladder-
The pitch ladder has graduations every 2 1/2
degrees within the range of ±20 degrees and graduations every 5
degrees from +20 degrees to +50 degrees and -20 degrees to -30
degrees. The 10 degree graduations of the pitch ladder have bar
ends that point toward the horizon line. Large chevrons (see Page
18) visible at excessive pitch angles, point toward the horizon
(above +50 degrees and below -30 degrees). ±90 degrees is
represented by small circles.
6. Bank Angle Indicator-
Composed of an inverted white triangle
and an upright white triangular Roll Pointer. The upright white trian-
gle points to the current bank angle. Graduations at 0, 10, 20, 30, 45,
& 60 degrees. (Note: the 0 and 45 degree marks are inverted triangles).
7. Skid/Slip Indicator-
The black trapezoid is centered under the roll
pointer in coordinated flight. Full scale deflection is the width of the trapezoid.
8. Altitude Tape-
Displays pressure altitude (with barometric
correction) with a display range from -1,000 feet to 25,000 feet. Each
minor graduation represents 20 feet and each 100 foot graduation is
labeled.
9. Altitude Window-
Displays current baro-corrected altitude.
10. Vertical Speed Indicator (VSI)-
The scale graduations
between ±1,000 fpm, are every 100 fpm. Above scale limits, a digi-
tal readout of the current vertical speed is displayed on the appro-
priate end of the VSI scale. The max displayed value of the digital
readout is ±4,000 fpm.
These features are only available in configurations that include at least
one GPS/VHF navigator :
11. Vertical Deviation Indicator (VDI)-
The VDI is displayed when
VLOC is selected as NAV source and the ILS glide slope signal is
received. The source of the VDI data is displayed immediately below
the VDI (eg. ILS). If the GS signal is lost, the VDI is replaced with a
red
X
and the letters ILS turn red. Once displayed, the VDI may be
removed by changing the NAV Source or changing the localizer fre-
quency.
12. Horizontal Deviation Indicator (HDI)-
Displayed when
VLOC is selected as NAV source and and the localizer signal is
received. The source of the HDI data is displayed immediately to
the right of the HDI (eg. LOC or ILS). If the signal is lost, the HDI
is replaced with a red-
X
and the source letters turn red. Once
displayed, the HDI may be removed by changing the NAV Source
or changing the VOR/LOC frequency.
ADI Symbology
System Overview
Содержание FLIGHTMAX Entegra
Страница 1: ...Primary Flight Display Pilot s Guide 600 00081 000 Rev 07 ...
Страница 3: ...FlightMax Entegra PFD ii 600 00081 000 Rev 07 Note Above picture depicts a standard SRV Configuration ...
Страница 5: ...FlightMax Entegra PFD iv 600 00081 000 Rev 07 Intentionally Left Blank ...
Страница 11: ...FlightMax Entegra PFD 6 600 00081 000 Rev 07 System Overview Right Knob Buttons 2 1 3 ...
