Avidyne FLIGHTMAX Entegra, Руководство пилота

Страница: 28 / 42

600-00081-000 Rev 07 -23- FlightMax Entegra PFD
Vertical Modes
1. Altitude Hold Mode- Push the ALT button on the autopilot
control panel to enable altitude hold. Current altitude at the time of
button press will be selected as the target altitude and the autopilot
will hold that altitude. The Alt bug will be set to the nearest 100 feet
of the current altitude and will become solid magenta.
2. Vertical Speed Mode (55X Only) - Push the VSI Bug button
and rotate the PFD knob to set the desired vertical speed. The VSI
bug is hollow at this point. Engage the VS mode by pressing the
VS button on the autopilot control head. At this point, the VSI bug
will become solid magenta. When VS mode is cancelled, the VSI
bug will become hollow but remains at its last value.
3. Altitude Capture Mode (55X Only) - Push the Alt Bug button
on the Entegra PFD and rotate the right knob to set a desired target
altitude. Engage Altitude Capture mode by pressing the ALT and VS
buttons on the autopilot control head simultaneously. The Alt Bug and
VSI Bug will become solid magenta. The autopilot will then follow the
VSI bug to the selected target altitude. As the target altitude is
approached, the VSI bug will automatically move toward zero and will
become hollow when the target altitude is captured.
One of the Horizontal Modes (HDG or NAV) must be engaged
on the autopilot control head before a vertical mode can be
used.
The knob on the right side of the autopilot control head can
be used as an altitude “bump,” such that each
rotational click of the knob will change target altitude by 20
feet. The altitude bug setting will not change.
The VSI Bug may be set to a range of +/- 1,600 fpm. This range
coincides with the VS limits of the autopilot.
Autopilot Use and Control
User’s Guide