Avidyne FLIGHTMAX Entegra, Руководство пилота

Страница: 27 / 42

FlightMax Entegra PFD -22- 600-00081-000 Rev 07
User’s Guide
Autopilot Use and Control
Horizontal Modes
1. Heading Capture/Hold Mode- Press the Hdg Bug button on the
PFD and rotate the right knob to set a desired heading. Press the
HDG button on the autopilot control head to engage heading mode.
At this point, the heading bug will become solid magenta and the
autopilot will track the input heading. The autopilot control head will
indicate “HDG”. The heading bug will remain solid magenta until
heading mode is cancelled. Select a new heading at any time while
the autopilot is in heading mode and the autopilot will track the new
heading bug value.
2. Nav Mode- Press the NAV button on the autopilot control head to
engage Nav mode. The autopilot will intercept and track the desired
course. In this mode, the autopilot tracks the active plan of the
selected navigator (Nav=GPS1 or GPS2) or an active VOR or
localizer (Nav=VLOC1 or VLOC2). The autopilot control head will
indicate “NAV”. In this mode, the heading bug will be hollow and
remains at its last set value, which is not necessarily aligned with
the Nav course.
3. GPS Roll Steering Mode (55X only) - In this mode, the autopi-
lot tracks the active flight plan of the selected navigator (Nav=GPS1
or GPS2). Press the NAV button on the autopilot control head twice
to engage GPSS mode. The autopilot will then begin tracking the
GPS steering commands from the selected navigator. The autopilot
control head will indicate “GPSS”. GPSS mode is the recommended
Nav Mode during autopilot operations due to increased accuracy. In
this mode, the heading bug will be hollow and remains at its last set
value, which is not necessarily aligned with the Nav course.