EN
24
Once all these settings have been confirmed, you
can save your automation at the top right
8.2.1PROGRAMMING THE “LIVING ROOM
LIGHTING” AUTOMATION
The automatic action in this example will allow the
user to turn on the bulb at night as soon as motion
is detected by the camera and the lamp is already
off. After a minute, the lamp will turn off until the
next detection.
First, select the condition type. In this example, all
of our conditions must be active to turn the bulb
on. So select
quand toutes les conditons sont
réunies (when all the conditions are met).
Then select the conditions. In our case, we need
one motion detection condition and another for the
lamp to be off.
• FOR THE CAMERA
D - USING THE PRODUCT
