Connecting Cables to the MediaSwitch 16
33
3. Position the optical SFP in front of a MediaSwitch 16 port (see
Make sure the optical cable connector is facing
away
from the
MediaSwitch 16 with the handle in the up position.
4. Slide the optical SFP into the MediaSwitch 16 port. You should hear a
click when the optical SFP is seated in the port.
5. Remove the protective covers from the optical cable connector on the
optical cable.
6. Remove the protective cover from the optical SFP in the MediaSwitch 16.
7. Attach the connector on the optical cable into the optical SFP for the
client (see figure
). Firmly push the plug
on the optical cable into the connectors on the optical SFP.
8. Label the optical cable with the name of the PortServer system to which it
connects.
MediaSwitch 16 Port Layout
Connecting the PortServer System to Your Network
n
Skip this section if you intend to set up a PortServer Pro workgroup. As part of
the PortServer Pro setup, you must install and configure the Ethernet switch,
which provides Ethernet connectivity.
You can connect the PortServer system to its clients using any component of
the Ethernet network you choose (switch, hub, and so forth). Consult your
network administrator to determine how you need to connect the PortServer
system to your network.
a
MediaNetwork client ports
File Manager port
MediaNetwork client ports
Storage ports
Port 15
Port 0
Содержание SR2400
