Avid Technology Pro Tools SYNC HD, Руководство пользователя

Страница: 163 / 166

Appendix A: Compliance Information 157
Safety Compliance
Safety Statement
This equipment has been tested to comply with USA and Canadian
safety certification in accordance with the specifications of UL
Standards: UL60065 7th /IEC 60065 7th and Canadian CAN/CSA
C22.2 60065:03. Avid Inc., has been authorized to apply the
appropriate UL & CUL mark on its compliant equipment.
Warning
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other equipment (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect power cords from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the equipment.
11) Only use attachments/accessories specified by the
manufacturer.
12) For products that are not rack-mountable: Use only with a cart,
stand, tripod, bracket, or table specified by the manufacturer,
or sold with the equipment. When a cart is used, use caution
when moving the cart/equipment combination to avoid injury
from tip-over.
13) Unplug this equipment during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the equipment has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the equipment, the equipment
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15) For products that are a Mains powered device:
The equipment shall not be exposed to dripping or splashing
and no objects filled with liquids (such as vases) shall be placed
on the equipment.
Warning! To reduce the risk of fire or electric shock, do not expose
this equipment to rain or moisture.
16) For products containing a lithium battery:
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
17) For products with a power switch:
The main power switch is located on the front panel of the SYNC HD
or SYNC I/O It should remain accessible after installation.
18) The equipment shall be used at a maximum ambient
temperature of 40° C.