Avid Technology Pro Tools MTRX Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 63

Avid Technology Pro Tools MTRX Скачать руководство пользователя страница 55

51

Eq Types

The following EQ types are available:

• Parametric EQ filter

• Shelving filter: High Pass or Low Pass

• Butterworth filter: High Pass or Low Pass

• Linkwitch Riley: High Pass or Low Pass

The preceding figures show configurations for a stereo speaker set. When configuring the speaker set, select the

speaker format

from

the preset or custom format list. The 5.1 speaker set is the selected output speaker set in the following figure. The speaker output sets
can be configured freely in the monitor profile editor. An additional curve is shown in the graph reflecting the presence of the LFE chan-
nel.

When a speaker set format with one or more speaker SUB channels is selected like 5.1 with one LFE channel, it is also possible to apply
bass management functionality to the speaker set.

Bass Management for a speaker set is enabled by activating the

BMngt

button as shown in the figure above. Once this is enabled the

curve for the selected speaker will reflect the high pass filter applied in the white resulting curve. When selecting the LFE/SUB channel
the response for the low pass filtered curve is shown. The low pass filter curve is also shown the in the non-SUB channels as an addi-
tional information.

«
...
53
54
55
56
57
...
»

Содержание Pro Tools MTRX
































































Отзывы:

Нет отзывов