49
EQ
The EQ for all speaker channels in the control room speaker set can be edited and viewed by activating the
EQ>>
button. Note that the
button does not enable or disable the filters, it just changes the view.
EQ Filter Resources
SPQ processing resources required by the EQ vary depending on configuration and sample rate. As with the summing engine viewer,
the SPQ viewer shows the available and used resources for the filters (out of 1024 filters and 128 channels). If additional SPQ cards are
installed, available resources are increased accordingly.
DADman EQ Management Window
EQ view shows the assigned EQ for the selected stereo speaker channel of the selected output speaker set. The channel delay knob con-
trols the delay of the selected channel. This delay can be set between 0–600 ms in resolution of samples down to 10 milliseconds equiv-
alent to the resolution of the general delay setting.
The figure below shows the left channel with four EQs configured. They are shown in the graph with matching colors. The resulting EQ
response for all the enabled filters is shown as a white line. In the example below, the EQ is not enabled for the channel so the response
is flat.
Monitor section with expanded EQ view