31
3
Select
Bus 1
for
MIDI Input
and
Bus 2
for
MIDI Output
.
4
Select
Pro Tools PRE
for
MIDI Mode
.
5
Click the red button in the upper-left corner of the window to close it.
6
Leave DADman running in the background while running Pro Tools.
Configure Pro Tools Software
To configure Pro Tools for PRE control of MTRX units:
1
In Pro Tools, choose
Setup > Peripherals
.
2
Click the
Mic Preamps
tab.
3
Select
Type > PRE
for each Mic/Line AD card in the system starting with row 1 (there are eight channels of mic preamps per card).
4
Select
Receive From > Predefined IAC Driver Bus 2 > Channel 1
in the pop-up menu for the first Mic/Line AD card in the system.
5
Select
Send To > Predefined IAC Driver Bus 1 > Channel 1
in the pop-up menu for the first Mic/Line AD card in the system.
6
Repeat steps 4 and 5, but selecting the next Channel number for each additional Mic/Line AD card in the system (for example, a sec-
ond card would be set to
Receive From > Predefined IAC Driver Bus 2 > Channel 2
and
Send To > Predefined IAC Driver Bus 1 >
Channel 2
, and so on).
7
Click
OK
.
8
Choose
Setup > I/O Setup
.
9
Click the Mic Preamps tab.
10
Click on the first channel where the MTRX is physically connected.
11
Repeat this step for each Mic/Line AD card in the system
12
Click
OK
.
Pro Tools Peripherals, Mic Preamps page