Avid Technology MediaDock 2 Plus, Руководство по установке и эксплуатации

Страница: 62 / 88

62
Avid Editing System Hangs When an LVD Shuttle Is Removed
If your Avid editing system hangs when you remove an LVD shuttle,
follow the procedure for replacing an LVD shuttle in
“Replacing an
LVD Shuttle on a Macintosh System” on page 43 .
Newly Installed LVD Shuttles Aren’t Recognized by the Avid
Editing System
If your Avid editing system doesn’t recognize any newly installed
LVD shuttles, use AVIDdrive Utility 2 to scan the bus and mount the
newly installed LVD shuttles. See
“Replacing an LVD Shuttle on a
Macintosh System” on page 43 .
Striping
You can stripe multiple LVD shuttles on one SCSI bus channel or
across two SCSI bus channels.
On a Windows 2000 system, you can move striped drives from one
Avid editing system to another by using the Disk Management tool.
For information about the striping process, see the setup guide for
your Avid editing system or consult your Windows 2000
documentation or Disk Management Help.
When using a Macintosh operating system, use the ADU2 to create
and manage striped drives. See the ADU2 documentation for more
information.
The following sections contain procedures for using the Windows
Disk Management tool to manage striped LVD shuttles:
• “Creating Primary Partitions and Formatting Drives with the
Windows 2000 Operating System” on page 50
•
“Transferring Disk Drives or Stripe Sets from the Windows NT
System to the Windows 2000 System” on page 54