INSTALLATION INSTRUCTIONS FS006
© Panduit Corp. 2008
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 11
O
PTICOM
Q
UICK
N
ET
Rack Mount Fiber Cassette Enclosures
Part Numbers: FCE1U, FCE1UA, FCE2U
1 ENCLOSURE
2 (3)
T
AK
-T
Y
Tape (6
"
pcs.)
2 (3) ADHESIVE MOUNTS
2 SLACK SPOOLS
1 (2) #10-32 x 3/8
"
SCREW
3 (4) #10-32 HEX NUTS
WARNING: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. DO NOT LOOK DIRECTLY INTO THE END OF THE
CONNECTOR. DO NOT INSPECT WITH MAGNIFYING DEVICES. MAINTAIN DUST CAPS ON UNMATED CONNECTORS.
CAUTION:
Fiber optic cable is sensitive to excessive pulling, bending, and crushing forces. Consult the manufacturer’s cable specification sheet for the
specific cable in use.
Follow TIA/EIA-568-A, 569, 606, and 607 installation guidelines where applicable.
Care should be taken when opening or closing a fully loaded drawer in order to protect the fiber components.
Contents
1 (2) FIBER GROMMETS
4 #M6 x 1 SCREWS
1 (2) STRAIN RELIEF BRACKET
4 CABLE TIES (PLT2S-M0)
2 (4) PLUNGERS AND GROMMETS
2 (4) BEND RADIUS CLIPS
4 #12-24 x 1/2
"
SCREWS
1 CAUTION LABEL
1 LASER WARNING LABEL
3 BEVELED ENTRY CLIPS
Enclosure
Trunk or Interconnect
Cable Entry Grommet
ASSEMBLY VIEW
O
PTICOM
Fiber Adapter Panel (FAP) Installation (FAPs not included).
FCE1U
Strain Relief
Bracket
Cover (field removable)
Bend Radius
Control Clip
Door Assembly
(shown in open
position)
FCE1UA
(FCE2U)
Figure 1
Plunger and
Grommet
Enclosure Sliding Drawer
Fiber Adapter Panels (FAPs):
Up to 4 for FCE1U, FCE1UA.
Up to 8 for FCE2U.
